JCB record attempt gains speed
17 June 2026

JCB’s bid to set a world hydrogen land speed record is surging ahead, with the car now built and testing under way.
The company announced its ambitious plans with the unveiling of the JCB Hydromax car powered by two JCB hydrogen internal combustion engines that can be fitted to some of its machines – at its World HQ in Staffordshire on 12 May. Now just over a month later, the building of the vehicle is complete and full testing is under way at RAF Wittering near Peterborough, where it reached a speed of 177mph yesterday driven by Wing Commander Andy Green OBE (pictured below).
The project comes exactly 20 years after JCB set a land speed record (350.092mph) with its Dieselmax car powered by one of its diesel engines and driven also by Andy Green. The company is returning to the Bonneville Salt Flats in Utah for a similar attempt using hydrogen power.
Speaking after the day’s trial at RAF Wittering, Andy Green praised the speed at which the design and manufacturing team had taken the Hydromax from the initial stages to practical reality in a matter of weeks.
Next month the car will be flown to Bonneville for further preparation on the Salt Flats, including the attempt to set a Fédération Internationale de l’Automobile (FIA) world hydrogen land speed record. The FIA is the global governing body for motor sport and the federation for mobility organisations worldwide.
JCB Chairman Anthony Bamford has spearheaded JCB’s £100m investment to develop hydrogen powered internal combustion engines. Lord Bamford said: “Twelve months ago this car was a set of drawings being discussed by a room full of engineers. Today it is a reality and on wheels, running, and being tested in the UK. The team has done a wonderful job to get us to this point. Our focus now turns to the real challenge: setting a world hydrogen land speed record in Bonneville.”
JCB Engineering Director Ryan Ballard, who is leading the project, said: “More than 150,000 hours of work has got us to this point; the next phase is where we find out what the car actually does, not what we think it will do. Every run, every refuel and every tyre change we complete in the UK is one our team won’t be doing for the first time on the Salt Flats. Our goal is simple: to arrive at Bonneville fully prepared, with a car and a crew that know exactly what they are doing.”
President of the FIA, H.E. Mohammed Ben Sulayem said: “JCB Hydromax’s first official test marks an important milestone on the road to a new hydrogen land speed record. This is a big achievement and I would like to extend my sincere congratulations to Lord Bamford and the entire JCB team. Through this world record attempt JCB is pushing the boundaries of engineering innovation and hydrogen technology, demonstrating the role motorsport can play to advance the future of mobility. I look forward to seeing the project continue to develop ahead of its world record attempt in August.”
The initial technical partner meeting for the project with JCB, Prodrive, Ricardo and Xtrac was held on 5 June 2025 and almost a year to the day, the 32ft JCB Hydromax rolled on to the tarmac at RAF Wittering for its very first run under its own hydrogen power. This marked the start of a full UK test programme covering shake-down runs, hydrogen refuelling drills and pit-stop rehearsals.
The JCB Hydromax is powered by two of the company’s own production-based hydrogen internal combustion engines, driving the front and rear wheels respectively. Modified for extra power, they produce a combined 1,600bhp instead of the standard JCB hydrogen engine’s output of 74bhp each.
Around one kilometre of wiring runs through the car, while there has been extensive use of 3D-printed components to keep weight down and packaging tight. The crankshaft is the same one JCB uses in its 448 hydrogen and diesel engines.
Keeping the hardware alive at full power is a key engineering challenge. The pistons alone require one litre of cooling oil every second, as much oil flow as the rest of the engine combined, to stop them overheating. A specially developed exhaust valve technology handles the temperatures generated by 1,600bhp of hydrogen combustion.
Each titanium turbo compressor spins at more than 150,000 rpm at close to 300°C, pumping the equivalent of a standard bathtub of air every half-second. However, on a full record run, JCB Hydromax will consume just over 2kg of hydrogen and produce 18 litres of water, highlighting the technology’s green credentials.
I was fortunate enough to be able to attend the testing day at RAF Wittering, where the JCB Hydromax team also gave more insight into the vehicle’s ground-breaking technology and how it epitomises the company’s approach to sustainability. I’ll be reporting more on that soon.
Photos © Alan Guthrie
● Subscribe free to the blog here to make sure you receive my regular news updates for tool hire and plant hire professionals

